1
Lay a base for the stack. This can be two two-by-four or two-by-six boards or two long poles or branches. Lay them far enough apart to lay an average piece of firewood. Set the base facing east-west so your stack will have more sunlight during the winter.
Step
2
Pick out some pieces shaped like half-moons and quarter-moons. At each end of the pile, place a half-moon piece with the flat side up across the base. Place two quarter-moon pieces at right angles across the half-moon shape, with the angles sides facing down. You now have a solid base for your stack.
Step
3
Stack the firewood across your base, mixing sizes and types of wood as much as possible to provide optimum airflow. Continue stacking until the stack reaches the desired height.
Step
4
Cover the stack with a plastic tarp, or build a shelter over the top to keep the wood dry.
Flamez
BMW X3 2.0D M Sport; Mercedes SLK 200K, Mac1motorsports Worx
On the subject of wood........ we're looking at replacing the gas fire in the living room for a wood burner. The fireplace is up to the job but we will need a chimney building as the existing flue isn't up to the job (its just a simple gas fire effort). This is looking like the next job once the extension is finished!
Yes, you need a lining in the chimney as well so the stack will need to be big enough.
I built an inglenook fireplace in the lounge, but fortunately that was an outside wall so I could get all the dirty work done outside first (i.e. the lining) before breaking the wall open to do the rest of the fireplace.